• T156@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    4 months ago

    They usually do. They just do the same thing a lot of nuclear reactors do and also evaporatively cool one end of the heat exchange loop.

    • Echo Dot@feddit.uk
      link
      fedilink
      English
      arrow-up
      0
      ·
      4 months ago

      As far as I can see they don’t ever do it that way, that’s the problem, if it was a closed loop they wouldn’t be pulling water from the mains and causing water pressure issues for everybody else.

      • T156@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        4 months ago

        They cool the hot side of the loop with running water, like reactors do, rather than using air.

        So the loop is closed, but they’re using running water to cool it off faster, rather than needing a bigger radiator on the hot side.

        • Echo Dot@feddit.uk
          link
          fedilink
          English
          arrow-up
          1
          ·
          4 months ago

          That’s not what they’re doing though. That would be fine that’s just a heat exchanger.

          What they are doing is pulling water from the mains to cool the system either directly or to cool an internal system via heat exchanger and then are dumping hot water back into the environment. They’re not pumping the water to cooling ponds and letting it cool back down and then pulling the water back out of the cooling ponds to use again.