Just checked my UPS. It sits at 105W for:

• HP Mini PC
• Synology 4 Bay NAS
• DrayTek Router
• Mikrotik 16 Port Switch
• PoE Switch
• 3 AP’s
• 1 Raspberry Pi 3B
• 2 NanoKVM

I am also using Beszel after using checkmk. For me checkmk was way too complicated (but is also way more powerfull) to setup and maintain propperly. So I switcheed to beszel because it is much easier and good enough for my use case which is:

• Is the thing running at all?
• Disk full?
• CPU, network, etc. on full throttle for some strange reason?
• send me a mail if somethings wrong

Besides that I don’t need anything. The only thing missing is SNMP support to check switches, routers and AP’s.

I do cooking on living history events for dozens of people. And creating the shopping list for them (where a recipe is based on another recipe) is always a painpoint. This sounds versy interesting (never heard of it).

I will give it a try. Thanks for sharing!

This is really some amazing work! It helped me switch my Sons system from an old 1060 6G to an RX 580 (which I had laying around).

Performance is about the same (sometimes slightly better). But now I do not need to fiddle with this old nvidia GPU driver anymore!

My cabinet currently is 9HE high and it can fit 2 mini-pc’s easily and all the rest. Just the NAS does not fit into it. For that I would need at least 12HE.

Thanks sharing your experience! Does it also support the 2-way Audio of these cameras?

Digitus has a lot to offer for 10" Racks. I use a lot of their Basic stuff for my Racks. AS a Server I am a fan of Mini-PC’s. They are (imho) good enough for SOHO users. For storage an off the shelf NAS is small enough to fit inside the Rack. I did not find a good option yet for a TrueNAS solution (maybe one of the NAS solutions where you flash your own operating system?).

From my 10" homelab:

• Enclosing: Digitus 10" 9HE Wandgehäuse. But today I would get the 12HE version of it (my Homelab expanded beyond the available space)
• Patchfield: Digitus 10" 12 Port LSA Patchpanel Weiß. There are also keystone version if you prefer them. I did go for this because it is cheaper and I only need RJ45.
• Power connector: DIGITUS 10 Zoll Steckdosenleiste. it has 4 sockjets and a switch. I am using 2 of them.
• Shelfs for Servers, etc.: Digitus 10" Fachboden. I use them to keep my Mini-PC’s and router in the Rack.
• Router: Draytek Vigor2927 it just fits on a shelf and all Ports are accessible. It is connected to a Fibre-Modem, so it just being a router is good enough for me.
• Switch: ALLNET Switch smart managed 16 Port Gigabit. Unfortunately I could not find an option including PoE (that is reasonably priced…) so I went for this managed Switch and an extra PoE Switch.
• PoE Switch: YuanLey 11 Port Gigabit PoE Switch, 8 PoE+ Port 1000 Mbit/s, 2 Gigabit Uplink, 1 SFP Port, 120W 802.3af/at. It is not directly obvious from the product page. But the 2 included Rackmount ears work for a 10" Rack.
• Mini-PC as Server: HP EliteDesk 800 G3 Desktop-Mini-PC . You can get these on the used market for cheap. Look if you can find one with an i5-8500T (KabyLake architecture). These chips have very good Transcoding qualities (Quicksync)
• NAS: I use a Synology DS-918+. It fits on a shelf isnide the Rack. but due to Space limitations (9HE instead of 12HE) it is now stacked on top of my Rack.

I don’t know where you are located. So maybe you need to check if these are available to you.

Didn’t know this existed. Gives the flexibility to choose between different Hardware Vendors.

But do you have any experience on how easy it is to flash this to the Hardware and how good it works?

I would also propose going with Tailscale instead If a VPN + DynDNS solution. Imho it is a lot easier to Setup compared to VPN + DynDNS If you are a beginner and just starting out.

If at some point you need more and then is available in the free Tier of Tailscale and you do not want to pay for it (and you have built up some knowledge!) you can switch to something like Headscale or Netbird.