

$100 usd is going to get you something pretty dire unless you luck out. It doesn’t take too much more to go from >15 years old to something <8 with a MUCH better CPU and ram options.


$100 usd is going to get you something pretty dire unless you luck out. It doesn’t take too much more to go from >15 years old to something <8 with a MUCH better CPU and ram options.


I just hate getting blinded by the incredibly bright brights. I stick to SDR for that reason alone.


3 2 1 offsite backups typically happen a lot less often than local copies or local backups.
I also don’t really consider any machines data to be irreplaceable. If I lose my phone I want the latest backup. But taxes or photos I care for? Those are an entirely different backup, and those aren’t incremental. They’re just what they are.


Kinda depends on what it’s for. My server? IDK, 2 days. Maybe have a dedicated weekly/monthly backup left behind. PC? Honestly just the latest is fine.
But it’s a 10tb drive, so I’ve got months of backups even if they’re running continuously. It’s less a how comfortable I am and more a how much can I afford. (a lot more before the shortage)
I also explicitly purge stuff that’s constantly changing like logs. I don’t care for logs in my backups. Only on the live machine.


As long as I have space. My backups are on dedicated drives, and as they run out of space the old ones are deleted.


Just RTFM!!!
*reads the manual and there’s nothing about this*
…ok. Now what?
But enclosed in a box without much airflow and those temps are going to creep up over time. And take even longer to cool down. Hopefully there’s fans in the bottom or side. Because one exhaust is not great for even just the heat from those hard drives.
I think the best way to handle airflow out is to have a turn or two on the intake/exhausts for the noise to get trapped. I personally just put mine in my basement though. That limits the sound pretty well.


Gotta go fast. My WiFi can achieve > 1gbit, my internal network is already 10 gig. Why not support faster everywhere?


I do this at work. If you don’t do pass through for the NICs I’d highly suggest it. When it’s a router it’s insane how much the overhead can be.
We have a 4 gig connection and with the virtual nics got maybe just over 1gbit on a Xeon silver based R640. But after pass through solid 3.5ish. Not sure where the bottleneck is currently, but our other servers do >4 just fine.


I was using an N100 based mini PC and it did fine at 1gbit. But now that I have 3, and it’s realistically closer to 4 or 5 it doesn’t cut the mustard.
Proper hardware based routers are also just so much more efficient. That N100 machine was constantly hot to the touch. My new UniFi router uses less power and does 10 gig easily.


Double check the CPU is still running at full speed. Without a battery most mopdern laptops will throttle CPU (and maybe GPU) performance.
Also there’s no reason to remove the battery if you can cap it’s charging. 80% is better than 100%, but if it’s plugged in 24/7 cap it as low as it will let you. But 60% is even better than 80% for health. And any cap below 100% severely reduces the chance its battery will expand.


The treedix tells you if it can do thunderbolt, and if it can do thunderbolt it can do video. It also has a pin connection testing so if it’s a usb 3+ cable and it has all the pins it should do video. Google also says any 10gbit cable should do video.
#2 is going to be some extremely expensive professional grade gear. You can just get 2 10 gig capable devices and try running an iperf test between them for probably less money. My friend worked for Spectrum and they had a device that did that for $20,000. I’m sure a cheaper device could do it, but two 10 gig capable usb dongles and two devices you already own are probably cheaper. The devices that check that the pins are connected are dirt cheap, but if you want to see what those wires are capable of then good luck.


They’re upside down so you could fit an ISA and PCI sockets could fit in the same slot back in the 90s.
I can’t find any of them installed in a case, but I could find this card with a combo slot. The pci would be facing down, but the ISA card would be facing up



TIL it was still in the store.


That and middle mouse button failing. But nobody makes a mouse with a reliable middle mouse button.


Idk what’s going on with mine, but after 10+ years that soft touch is still going great. I think it’s because my hands aren’t very oily, and they don’t get sweaty, so it doesn’t react to anything.


They’re banned now, so they can’t.


Sanitation is essentially a bot automatically reposting content from Reddit. None of their posts are organic.


That’s the key. It just works. No extra setup necessary.
And more importantly, I do t have to have my 60 year old mom do some additional setup in her end. Just install the app, and go.
If the point of connecting it to WiFi is to make it easier to print then why would you isolate it only to make it harder to print?
If you want 100% no sneaky stuff connect it to some PC and set up a cups server on it.