You are just seeing the remains of snapd

This is actually pretty smart

What filesystem are you using? Generally filling a disk to 100% is a very bad idea as there isn’t any room to relocate sectors.

I personally recommend ZFS but it does require some knowledge to setup and maintain. Make sure you are booting off of a SSD as that will make the system much faster

That may be your problem. Do you have multiple 10G cards? Try doing a direct link between two machines. Auto MDIX will take care of the electrical connection but you will need to set static IPs in order to run a iperf3 test

Additionally, make sure you are using cat6/6a cables

What are you plugged into?

This isn’t facebook

They can forbid you from anything and they can terminate your service for any reason

I’m not sure you know what SNMP is

Also Iot devices aren’t really much of a threat. It doesn’t hurt much to put them on a separate vlan but the security issues are mostly unrelated to a local home network.

Also don’t put things on the internet. That is generally a really bad idea and will bite you in the butt eventually.

OpenSSH rate limits authentication attempts so it isn’t a big deal. My public VPS gets pounded but it doesn’t matter as it doesn’t really use any system resources.

Don’t put it on the internet

Instead, use a VPN solution. I’m also not sure why you setup ClamAV. It doesn’t really do much and is probably a complete waste of time. If anything you should setup and properly configure SElinux but it isn’t trivial to do and is overkill. Simply keeping your stuff of the internet will do far more for your security than anything else.

The problem with AI is that it doesn’t push back. It is fantastic at manipulating your emotions.

Using AI is generally a bad idea

It will bite you if your not careful

Do you need to publicly expose your services?

I personally use a VPS with Wireguard

https://liberapay.com/forgejo

Donate if you like Forgejo

I usually just use proper network devices. OpenWRT will generally run on anything with Mediatec or Qualcomm based assuming it has support

How does the latest release compare to the LTS?

I will over engineer my network. No I don’t really need a complex setup but I’m doing it anyway. Yes I shot myself in the foot with routing.

Yes

If it is a different team, why wouldn’t you just say that’s your recommendation? Your story isn’t making sense

I don’t know what is happening any more